Bosch eBike Systems is launching a new riding mode for the Performance Line CX, which has been specially designed for the requirements of e-mountainbikes: The E-MTB mode provides a natural riding experience and optimum support on different terrain. Depending on the pedal pressure, the progressive motor support automatically adapts to the individual riding style. It is not necessary to change the support modes; e-mountain bikers can focus on the trail while riding and keep their hands off the mode remote. With the EMTB mode, starting off on steep climbs is no problem and progress in the terrain is noticeably easier. The new E-MTB mode will be available as a software update from July 2017.

Dynamic handling from the first pedal stroke

The eMTB mode replaces the previous Sport mode and varies between the Tour and Turbo riding modes. With a maximum torque of up to 75 Nm, the motor dynamically boosts the rider's own power between 120 and 300 percent. The motor should always support the motorized mountain biker with the ideal power, even at low cadences, without the need to switch gears. The level of assistance depends on the pedal pressure. It kicks in with light pedal pressure, while the drive provides maximum thrust when more pressure is applied to the pedal. The system reacts with virtually no delay, and the natural riding sensation should be maintained both when starting off and accelerating. As soon as the pedal pressure decreases, the assistance is gently reduced. Narrow and winding passages can thus be ridden through in a more controlled manner.