Soft steel and light and airy: Fox launches new shocks for trail bikes | Ride MTB

Soft steel and light and airy: Fox launches new shocks for trail bikes

Fox is launching two interesting buffers for the 2022 model year: with the new FloatX, the US suspension specialists are offering a lightweight air shock with the qualities of the downhill shock, combined with simplified adjustability. At the same time, Fox is making the DHX steel shock compatible for short-stroke trail bikes thanks to shorter installation lengths and some simplifications.

Soft steel on the trails

Steel spring shocks are not only popular for downhill, but also for enduro. It is therefore obvious that the fine and consistent response of steel shocks should also appeal to short-stroke trail bikes. Fox therefore offers the DHX shock in installation lengths from 230 to 190 millimetres, or from 205 to 185 millimetres for trunnion mount shocks.

  • Available in multiple configurations including 2-position lever for climbing mode
  • Adjustments possible without tools, even while riding
  • New single-tube principle and new piston simplifies adjustment and enables wider rebound tuning
  • Separate lockout lever can be set to different levels to support different riding preferences
  • Suspension travel-specific reservoir lengths minimize installation space
  • Available as Factory and Performance Series, the latter has no Low Speed Compression adjustment
  • Lightweight, but takes it hard

    The new FloatX air shock was specially developed for aggressive trail riding, i.e. for riders who like to let it rip and have an active riding style. The shock absorber combines sophisticated damping and consistent performance with a low weight. The FloatX shock absorber is available in installation lengths from 190 to 230 millimetres, or from 185 to 205 millimetres for trunnion mounts.

    • New monotube design brings simplified adjustability and improved rebound damping
    • New enlarged air spring allows lower air pressures and more linear suspension with improved bottom out behavior thanks to MCU end stop, as with the FOX DH shocks
    • Separately tunable hard mode from light ( eMTB ) to firm ( trail bike ) allows specific tuning for the center of gravity of use
    • Specific reservoir lengths optimize the installation space depending on the suspension travel
    • Available as Factory, Performance Elite and Performance Series
    • 459 grams

    ridefox.com


    Note: This content has been automatically translated from German. Please report any incorrect translations.