Shimano XTR: The marathon setup | Ride MTB

Shimano XTR: The marathon setup

Shimano doesn't stop at the front derailleur with the new XTR. There is a top groupset especially for marathon use, which can still boast a really wide range thanks to the double crankset. If you still want to switch to a single chainring, you can do so later with the new XTR thanks to the selector system.

Shimano is still not completely falling for the single-chainring hype, but is indirectly paying tribute to the death of the front derailleur initiated by Sram: the new XTR no longer offers a triple crank. The marathon rider - or the rider who doesn't want to leave it at the bandwidth of a single-chainring solution - can ride a 38/28 double crank and thus obtain closely spaced gears that can be used to suit the load. The small chainring is bolted to the large chainring, while the large chainring is connected to the crank using the direct mount method. If the crank is to be used using the single chainring method, the small chainring can be easily removed.

Shimano has developed a new shift lever for shifting on the front derailleur. This is called Rapidfire Plus Mono, upshifting and downshifting is done with just one lever.

https://bike.shimano.com

www.ridextr.com


Note: This content has been automatically translated from German. Please report any incorrect translations.