29er, 170mm travel, Bosch CX, Forward Geometry: Mondraker Level | Ride MTB

29er, 170mm travel, Bosch CX, Forward Geometry: Mondraker Level

It's not just in the non-motorized trail and enduro segment that 29ers are all the rage - the combination of generous suspension travel, many watt hours and Newton meters as well as 29er wheels is also in the fast lane for e-mountainbikes. At Mondraker, the E-Fully Level marks the brilliant entry into this market.

With the new Level, Mondraker presents its first E-Fully with 29er wheels. The basis is an aluminum frame with a suspension travel of 170 millimeters at the front and 160 at the rear, making the Level the most progressive bike in the e-bike range according to the Spanish manufacturer. Like all other Mondraker bikes, the Level is equipped with Zero Suspension and Forward Geometry. The Zero Suspension System has been optimized for use with 29" wheels and steel spring shocks. The engineers have also consistently implemented the in-house "Forward Geometry" concept and adapted it for use with 29er wheels.

The two models Level R and Level RR are equipped with the e-bike-specific "Fox 36 E-Bike optimized" suspension fork. The fork is torsionally stiff, offers excellent suspension performance and impresses with the finest response behavior. "The minimal additional weight is not noticeable on the trail, but the steering precision is", says the manufacturer. In addition to 170 mm of travel, the fork offers shorter offsets of 44 mm, which should increase the grip of the front tire and therefore improve stability at high speeds.

The Mondraker Level comes with specific e-mountain bike wheels from DT Swiss, which allow a system weight of 150kg (weight bike + weight rider including luggage). The bike is fitted with Maxxis Minion tires (DHF 2.5" WT at the front and DHR 2.4" WT at the rear), which are expected to provide plenty of grip and reliability. Like all Mondraker E-MTB models, the Level is also equipped with a Boost hub with an installation width of 110x15 mm at the front and 148x12 mm at the rear. As with all Mondraker E-MTBs, the diameter of the thru axle is 15 mm and the bearings are extra large. This increases the service life and reliability even under higher loads.

The two Level models are equipped with a Bosch 500 Wh battery. The battery is integrated into the frame and can be removed if required. Mondraker's so-called HHG technology with internally routed shift cable, brake cable and hydraulic cable for the seat post is used on both Level models. This cable routing offers external stops for attaching the cables. According to Mondraker, this means that rattling cables are a thing of the past and the design remains as slim and elegant as Mondraker is known for.

The Level R and RR models are already available in Switzerland from stock at CH distributor Chris Sports.

mondraker.com


Note: This content has been automatically translated from German. Please report any incorrect translations.