Santa Cruz Tallboy 3 - the defender among mountain bikes
As a 27.5+ model, it shows its strengths in dusty-dry conditions, the wider tires find flotation on loose ground and offer plenty of traction even when normal tires have long since reached their limits. And when it's pouring with rain, the Tallboy, thanks to the lower tire pressure, keeps the track even over the most slippery root carpets, like a Land Rover Defender with the limited slip differential switched on. Built as a twentyniner, the Tallboy shows its familiar side: whether uphill or downhill, this bike is geared towards forward propulsion. With its large 29-inch wheels, the Tallboy's agility and speed make it the perfect companion for the hunt for trails and vertical meters.
New VPP suspension system and shorter chainstays
The combination of a steering angle of 68 degrees with 110 millimeters of the finest VPP suspension travel takes the original, playful character of the Tallboy to a new level. The longer reach, together with the further shortened chainstays, also contributes to this. These changes also put the Tallboy on a par with the other Santa Cruz models. Thanks to the eccentric flip chip on the upper mount of the rear shock, the geometry remains exactly as it should be - whether you install 29-inch wheels and a suspension fork with 120 millimetres of travel or 27.5+ wheels and a suspension fork with 130 millimetres. And this applies to all frame sizes, from S to XXL. The result is an extremely versatile bike that is the first choice for riders like Greg Minnaar.
Greg Minnaar's test ride - and probably the coolest way to open an apres-bike beer
Properties
-110mm (4.35") VPP suspension
-designed for suspension forks with 120mm travel (29 inch) or 130mm (27.5+)
-Flip chip on the upper shock mount for constant geometry with both wheel sizes
-68 degree steering angle
-short chainstay length
-removable front derailleur mount for maximum drivetrain flexibility
-Mounts for bottle cage in the main frame triangle
-Designed for 27.5-inch tires with a width of 2.8 inches, inches fit depending on tire model
Internal cable ducts for precise and rattle-free routing of cables and lines
-Bottom bracket housing with BSA thread and ISCG05 mounts for chain guide
-Available in frame sizes S, M, L, XL and XXL
-Test bikes M-XL available
-Available for immediate delivery
Note: This content has been automatically translated from German. Please report any incorrect translations.