Race Face is launching a new carbon wheelset for e-mountain bikes called the Era eMTB. The model complements the existing eMTB Built line and is aimed at riders who want to upgrade their bike with a lightweight, precise, and robust wheelset. It is based on the handling characteristics of the well-known Era carbon enduro wheels, which are known for their comparatively flexible yet precise ride feel. However, this concept has been specifically revised for use on fully motorized e-mountain bikes. According to the manufacturer, the wheelset has been developed from the ground up for the higher loads of eMTBs. The aim was to retain the lively riding characteristics of carbon wheels while making the construction stronger, more impact-resistant, and tailored to the additional weight of the battery and motor. The new wheelset is designed to offer a high degree of control, comfort, and durability even under repeated heavy use.

For the rim design, Race Face uses different profiles for the front and rear wheels, as already seen on the standard models. At the front, greater lateral flexibility is intended to improve handling and control on rough terrain, while at the rear, a more robust design increases impact resistance. The front rim is 18.6 millimeters deep. In combination with thicker spokes, lateral flexibility has been reduced by 15 percent compared to the standard version, according to the manufacturer, in order to better cope with the higher forces on eMTBs. The rear rim has a depth of 22.6 millimeters. Both rims feature the reinforced "Anvil Edge" sidewall, which is designed to increase tire protection and stability.

The hubs have also been modified. Vault hubs with 3 degrees of engagement and strong sealing are used, supplemented by an internal steel axle. This is designed to increase strength and stiffness and better withstand hard impacts. Race Face uses 28 J-bend spokes with black brass nipples at the front and 32 at the rear. The spokes are thicker than those on standard wheels and are designed to create a balance between weight, stability, and traction. Details Product: "Era eMTB" wheelset Application: E-mountain bike Material: Carbon Weight: 1929 g in 29 inches, 1883 g as mullet, each without rim tape and valves, with XD driver

raceface.ca