Dangerholm reaches for the mallet and 3D printer

Dangerholm Ferrari

Photo: Scott - Dangerholm

The result is always simple and always a Scott bike: Dangerholm is no exception with the Spark RC. But the approach is new. First there were wooden models, then the 3D printer was used.

System integration on the bike can lead to big frowns in the workshop, but the look, at least on the bike, wins out. Dangerholm has set its sights firmly on this system integration, the heart of which is a 3D-printed stem. The stem not only contains outer shells, but also electronics to integrate the Zirbel gearshifts.

The look is reminiscent of Italy, as Dangerholm was inspired by Ferrari, and of course the new tune object can only roll up in red.

scott-sports.com

11 Bilder anzeigen

Suitable Ride Brandguides

Alles Wissenswerte zu Scott gibts im Ride-Brandguide für Scott

Further content on this article

Light and potent: Dangerholm and Scott can do it

Stuff picks

Modern mountain bikes, even in the cross-country segment, have a lot on their ribs thanks to increased suspension travel and, for example, wider rims and tires. Tuning guru Dangerholm has therefore taken Scott's cross-country rocket under his wing and strived for an improved balance between lightweight construction and performance on the trail. Incidentally, Nicolai is taking the same lightweight approach with the new Saturn bike. And there's a magical jersey from Deputy Sheriff.

14.08.2022

Scott Über-Ransom: Dangerholm follows up

Swedish tuning expert Dangerholm presents its latest work, which stands out from the crowd: this time it is not lightweight construction that dominates, but enduro suitability. Dangerholm focuses in particular on key elements such as suspension, brakes and wheels. But see for yourself.

31.12.2022

Scott Epic 2024

Schurter and Dangerholm provide special editions

Unique bikes are very popular at Scott: Nino Schurter will be riding a special edition of his Sparks for the Cape Epic. And the Genius has been refined by head tuner Dangerholm.

16.03.2024

Bikeshops with

Scott

News about

Scott

Autor: Tobias Gütlin

News published on 13.11.2024

Note: This content has been automatically translated from German. Please report any incorrect translations.